Fresh New ProductsFresh Restocks
NewsShipping FAQ

Hori Hayabusa Silent Optical Joystick [AS Exclusive]

Introducing Hori's Silent Stick.  Using optical sensors, these provide the quietest and smoothest operation today.   Accurate, responsive, reliable.   This is the first time we've offered this part and quantities are limited.


  • Ultra quiet (Quietest on the market)
  • Optical sensors (Precise and Fast)
  • Requires power from the pcb from additional wire
  • 6-pin cable included (up / down / left / right / ground / power)
  • Balltop (Black) included
  • Dust washers and shaft cover included

Native Compatibility

The 6-pin harness with pre-terminated connectors plug directly into the following controllers with no soldering required:

Hori RAP4 Kai, Hori RAP V, Hori RAP N.  While there is a 6-pin connection for the Fighting Edge, this joystick does NOT work with the Fighting Edge due to a software update glitch which has not been resolved.  We would recommend going with the Sanwa Denshi 3rd Generation Silent Joystick in place of this for that purpose

Please note that this stick uses a 6-pin harness.  The additional connection for power, which you will need to solder to the pcb.  On the Brook UFB, it's noted as VCC on the terminal block.  On other PCB's, it will vary.  If you're not familiar with basic modding, please do not attempt to install this. While not difficult to do, we understand modding isn't for everyone

NOTE:  This joystick is not compatible with our EX GEAR Octogate as the restrictor plate for has a different shape

Quick Link:


$ 64.99